Note: When more than two courses are required wall ties may be necessary.ĬOVERAGE RATE: Apply at 4 to 6 gallons per 100 square feet. As an adhesive, 920 Fibered Emulsion should be applied in 4” diameter dabs at an approximate rate of 1 quart per 100 square feet, and the insulation pressed firmly into it immediately. When dry, it stays in place, even when exposed. It does not flow when applied in thick coats. The asphalt-based, clay emulsion roof coating protects asphaltic roofs, metal, and masonry. Polystyrene insulation adhesive: 920 Fibered Emulsion is a water-based emulsion that is 100% compatible with Polystyrene insulation or protection board. Versatile and exceptionally durable, Mule-Hide 301 Fibrated Emulsion Roof Coating is specially formulated to provide superior resistance to water and weather. Proceed with second coat at a rate of 2 to 3 gallons per 100 sq. Smooth out all wrinkles, making sure there is no trapped air underneath the fabric. Apply 31 Fiberglass Membrane or 34 Asphalt Saturated Fabric over the wet coating, overlapping all edges. įabric reinforced dampproofing: Apply one coat of 920 Fibered Emulsion at a rate of 2 to 3 gallons per 100 sq. (First coat must be allowed to dry prior to the application of the second coat). If applying two coats, each coat should be 2 to 3 gallons per 100 sq. (First coat must be allowed to dry prior to the application of the second coat).īelow-grade dampproofing: (exterior only) Apply one coat of 920 Fibered Emulsion at a rate of 4 to 6 gallons per 100 sq.
Cover all slots, joints and grooves and apply into all chases and corners.Ībove-grade dampproofing: (interior and exterior) Apply one coat of 920 Fibered Emulsion at a rate of 4 to 6 gallons per 100 sq.
Fibered asphalt emulsion free#
Coating should be continuous and free of pinholes or holidays. If applying two, allow the first coat to dry. Repair all cracks and holes with 920 Fibered Emulsion and 31 Fiberglass Membrane or 34 Asphalt Saturated Cotton Fabric, before applying the surface coating.ĪPPLICATION: 920 Fibered Emulsion is easily applied by trowel. Dry surfaces may be dampened with water before application. SURFACE PREPARATION: Surface should be free of oil, grease, dirt, laitance and loose material.
0 kommentar(er)
